Uncapping line LAYENS ES1B Paradise

6990 ,00 €

8000 ,00 €

LD0101

Uncapping line LAYENS ES1B Paradise

-€1,010.00
To order

Share in WhatsApp

6990 ,00 €

8000 ,00 €

Tax included

Paradise ES1B line configured for Layens frames, with inverter, 2 kW steam heating, stand and stainless frame rack. The P200 S press is optional. Made to order: frame samples, installation, guarding and the exact bill of supply must be approved before purchase.

6990 ,00 €

8000 ,00 €

Tax included

Quantity

Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of Uncapping line LAYENS ES1B Paradise

LAYENS

CONFIGURATION

2 kW

STEAM HEATING

INVERTER

VARIABLE FEED

P200 S

OPTIONAL PRESS

The Paradise ES1B is a mechanised line for opening the cappings on Layens frames before extraction. The advertised configuration combines the inverter-equipped uncapper, 2 kW steam blade heating, a stand and a stainless receiving rack for the frames.

This is a made-to-order unit from a legacy range: Paradise Honey's current website no longer lists the ES1B. The quotation therefore needs to lock down the exact frame geometry, layout, electrical supply and every included component. The P200 S cappings press is optional; neither the photograph nor the word “line” proves that it is part of the base supply.

01 · ACTUAL JOB

Repeatable uncapping without confusing the machine with the complete process

The operator loads frames into the slide feed and the inverter allows feed speed to be adapted to comb regularity. Legacy ES1B documentation describes adjustable cutting depth and a nominal 8–10 frames/minute, but that figure belongs to the machine and does not guarantee sustained honey-house throughput. Manual loading, wax and capping condition, temperature, distorted frames and downstream extractor capacity determine the real pace. Sunken or irregular comb may still need finishing with an uncapping fork.

02 · LAYENS COMPATIBILITY

A frame-format name does not replace dimensions and a trial with real frames

Before manufacture or adjustment, measure overall top-bar length, frame-body length and height, frame thickness and comb projection. Also check the spread between old, new and repaired frames. Paradise historically requested a hive box and several sample frames; this is the safe way to validate guides, support points, cutting depth and clear passage. An ES1B set up for one Layens geometry must not be presented as universal across every Layens variant.

03 · HONEY-HOUSE FIT

The bottleneck may sit after the blades, and cappings need an outlet

The machine opens cells; it does not extract, strain or separate the honey carried by the cappings on its own. Without a press, plan draining, a collection vessel, transfer and cleaning. With the optional P200 S, confirm the exact model, hopper, drains, power and parts included in the quotation. The published 2 kW applies to steam heating, not necessarily the combined demand of motors and auxiliaries. Size the extractor, buffer area and labour as well. For Calluna honey, uncapping does not remove thixotropy: validate a dedicated loosening and extraction system.

04 · BEFORE YOU BUY

Specify one complete configuration, not just a model name

Submit frame measurements and samples, request a dimensioned layout and bill of supply, and confirm voltage, phases, total current, steam generator, hoses, water, condensate and ventilation. The quotation should identify guarding, emergency stop, manual, wear spares, cleaning procedure, commissioning and the exact press if added. Test several representative frames before accepting the setup: correct adjustment prevents over-cutting, unopened cappings and jams.

GOOD FIT	Repeat Layens-frame work with controlled geometry and an extraction flow already sized for the output.
VERIFY	Measurements and samples, electrics/steam, guarding, drains and the exact bill of supply.
DO NOT ASSUME	Universal compatibility, sustained 8–10 frames/minute, or an extractor or P200 S press supplied as standard.

CONFIRMED DATA AND LEGACY REFERENCES

LTA reference	LD0101
Brand / model	Paradise Honey ES1B
Function	Uncaps frames before extraction; it does not extract or strain honey
Advertised format	Layens · validate dimensions and a physical sample
Configuration confirmed by LTA	ES1B with inverter, 2 kW steam heating, stand and stainless frame rack
Included according to LTA	Uncapper stand and stainless rack/track for frames
Cappings press	Optional P200 S · not included unless the quotation states it explicitly
Inverter	Controls feed speed; it does not replace mechanical setup or frame validation
Legacy feed reference	Five-frame slide magazine · confirm on the offered unit
Legacy throughput reference	8–10 frames/min in the old machine sheet · nominal, not guaranteed line throughput
Legacy motor reference	Blade motor 0.375 kW + feed gear motor 0.25 kW · confirm rating plate and total load
Advertised heating	Steam · 2 kW; confirm generator, tank, voltage, hose and fittings
Cutting depth	Adjustable in legacy documentation · calibrate with several real frames
Legacy material	304 stainless steel in the former range · confirm materials and finish of the supplied unit
Weight and dimensions	Not confirmed for the complete configuration; the 200 kg ERP value is logistical and is not used as a technical specification
Calluna honey	Uncapping does not remove thixotropy; a dedicated loosener/pricker and extraction method may be required
Documentation status	ES1B is absent from Paradise's current online range; require a unit-specific quotation, layout, manual and wiring diagram
Legacy manufacture	Finland · confirm origin of the configuration supplied
Safety and cleaning	Training, guarding and energy isolation before intervention; follow the equipment-specific manual